The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Longhorn Man · 03-02-2008, 01:03 PM

i doubt you'll find ANYTHING that is a bolt in. (the comment on the 73 - 87 being a bolt in is WAY off, they have totally funky floor boards, NOTHING bolts into them, and nothing in one of them will bolt into anything else)
Go to the junk yard and look around. If you are 5 ft 11 or more, you'll want to pay close attention to the thickness of the seatback. The thinner the better, you'll also want to pay attention to flat floors, or fairly flat floors.
There's hundreds of possibilies at your local wrecking yards... from the 60's to the 08 models.

03-02-2008, 01:03 PM	#10
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: seats i doubt you'll find ANYTHING that is a bolt in. (the comment on the 73 - 87 being a bolt in is WAY off, they have totally funky floor boards, NOTHING bolts into them, and nothing in one of them will bolt into anything else) Go to the junk yard and look around. If you are 5 ft 11 or more, you'll want to pay close attention to the thickness of the seatback. The thinner the better, you'll also want to pay attention to flat floors, or fairly flat floors. There's hundreds of possibilies at your local wrecking yards... from the 60's to the 08 models.