The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

djracer · 03-16-2008, 05:15 AM

For my combo.

14 to 1 comp. 468 with Brodix bb3extra square port heads. Edelbrock 2907 intake with an old dominator. Speedtech diffuser plate Spraying 250. I also have a fogger to add. 2 speed glide with ultrabell ultracase and 1.80 straight cuts. 9 inch Neal chance convertor redone by PTC. 9 inch ford rear with 4.30 rear gear and 35 spline gun drilled axles and 33 10.5w slicks. Truck has trailing arms coilovers an antiroll bar and a fatman mustang II front suspension. Truck weighs 3200 with me in it. Times are in my sig. Hopefully soon to lower!

03-16-2008, 05:15 AM	#41
djracer Registered User Join Date: Feb 2001 Location: Wetumpka, Al, U.S. Posts: 8,891	Re: post em up.... For my combo. 14 to 1 comp. 468 with Brodix bb3extra square port heads. Edelbrock 2907 intake with an old dominator. Speedtech diffuser plate Spraying 250. I also have a fogger to add. 2 speed glide with ultrabell ultracase and 1.80 straight cuts. 9 inch Neal chance convertor redone by PTC. 9 inch ford rear with 4.30 rear gear and 35 spline gun drilled axles and 33 10.5w slicks. Truck has trailing arms coilovers an antiroll bar and a fatman mustang II front suspension. Truck weighs 3200 with me in it. Times are in my sig. Hopefully soon to lower! __________________ Kevin Special Thanks to All who have helped on the TRUCK! My Pass Time Show http://s129.photobucket.com/albums/p...Chapter1-0.mp4 So Far my best Times are: Motor only: 6.44 1/8 @ 104.13 10.39 1/4 @ 125.83 Nitrous Times: 5.785 1/8 @ 118.65 with a 1.336 60ft 9.168 1/4 @ 142.58 with a 250 shot dead out of the hole!