[bigjimzlll]

Originally Posted by regan wilson

The alchohol should really help you with the extra tq you will make . Something else for every tenth I kill in the 60 I pick up 1 mph . I have been trying to run 150 or better on the stop for three years now and it has been elusive ....When I built the new motor I had to change cams becuase I went to the 55mm roller bearing deal . Well I went the wrong way on the cam I went with more lobe seperation hoping it would run harder up top but it killed the bottom end too much . This year I got a high dollar 10" converter and hadnt seen alot of change yet (just the trap rpm). I may get it there with this combo but dont know. I know this 10.6 deck block will take a 5 inch crank though . Maybe a 665 will do it .lol......It never ends !

How far did you spread the LSA out? Mine is 110 installed at 108. When I freshen(if I'm still running alky) I am going to widen it to atleast 112...maybe 114.
I'm running a 9" spragless converter..I had an ATI 8" but at it's tightest it was going 6800 on the brake. The new one is 6000