Re: Cuting front bag cups- again
Quote:
Originally Posted by jlaird
hotrodhomi, gringo, 1/4" clearance from and to what? bag to arm? So with a 1 5/8 cup, the bag wont touch the arm when fully slammed?
Did you guys use the SD cups? I thought I remember reading they are slightly too wide for the cup to lay down on the bottom of the spring cup.
|
The bottom outside edge of the lower bellows rubbed the spring pocket at the inner edge(towards the cross-shaft) and where the pocket bulges to clear the shock mount bolt. At 1.5" total height using SD cups, I cleared the inner but had to massage the shock mount area.
1 5/8" should be perfect. These problems were all at ride height with the bag inflated to 6" tall. Deflated will touch, but it shouldn't matter...
__________________
-Chris
Instagram _elgringoloco_
'70 Short-Wide How to: Ruin a perfectly good C10
‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd
'72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD)
'72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD)
'05 Yukon Daily Driven (not so stock) Yukon (SOLD)
‘07 Yukon Denali (daily)
Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy
|