The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

jaros44sr · 05-09-2008, 01:36 AM

Got some work dun on Jon's and my own. Got a sweet deal from Byrd on a polished alum. rad., and put a coat of paint on the PS pump. Looks like I will have to modify the brackets as the rad. is alittle wider than stock

Big J, got to breaking out the welder

Got to hang lower B post so I could move on to fit up the cab corners, it looks a little rough, but that is just the beginning. The rocker covers all this area, so you won't see it. In a hurry and caused a run in the paint

Sure is nice to work with shiny new metal, one spot of rust left and that is on the pass. lower B post

I've been worried about the fit of the cab corners, since I have never dun them before, but I shouldn't have been. The contours fit perfect...

Here's some pics

05-09-2008, 01:36 AM	#570
jaros44sr Registered User Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,432	Re: PO has me PO'd Got some work dun on Jon's and my own. Got a sweet deal from Byrd on a polished alum. rad., and put a coat of paint on the PS pump. Looks like I will have to modify the brackets as the rad. is alittle wider than stock Big J, got to breaking out the welder Got to hang lower B post so I could move on to fit up the cab corners, it looks a little rough, but that is just the beginning. The rocker covers all this area, so you won't see it. In a hurry and caused a run in the paint Sure is nice to work with shiny new metal, one spot of rust left and that is on the pass. lower B post I've been worried about the fit of the cab corners, since I have never dun them before, but I shouldn't have been. The contours fit perfect... Here's some pics __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 05-09-2008 at 01:50 AM.