Quote:
Originally Posted by red71cheyenne
I did check the square on it, thats the other reason I shimmed the driver's fender. That brought the two sides into alignment as far as fenders to cowl and fenders to radiator support. The distances are now the same on both sides, but the hood still didn't come into the right place. Which way would I move the triangles in order to pull or push the passenger in or out? Thanks, Jeff.
|
What I had to do with mine is loosen the cab mounts and pushed it as far as I could toward the passenger side then loosen the radiator support and push it as far as I could toward the drivers side. I'm still off about 1/8 inch on the passenger side but at least the hood closes