Quote:
Originally Posted by javadoc
What are you planning for the rebuild? I'm toying with building my 283 or just getting something... like a 327.
|
New Parts: Pistons, Moly Rings, Rod + Main Bearings, Cam Bearings, Timing Chain and Gears, Camshaft, Lifters, Oil Pump, Oil Pump Drive, Gaskets, Brass
Freeze Plugs.
Machine Work: Block = Clean, Magnaflux, Bore, Deck, Power Hone
Connecting Rods = Clean, Check for Straightness, Hone Big Ends
Crank = Clean, Grind, Chamfer Oil Holes, Micro Polish Heads = Clean, Magnaflux, Pressure Test, Install New Guides and Hardened Exhaust Seats, 3-Angle Valve Job, Mill Bottom, Grind Valves, Set Install Height, Set Spring Pressure, Assemble with New Seals, Vacuum Test.
(Eddings Engine Rebuilding Inc.)