The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

jb4short · 08-19-2008, 12:21 PM

Rob- if the spot welds holding the inner panel in, just inside the bed in front of the tailights, are on the edge of the metal or about 1/8" in they're probably NOS, ONOS, UNOS or some variant. If those welds are 1/2" to 3/4" of an inch in they're probably repros

Should be a vertical line of them top to bottom

If they're NOS send them to me and I'll properly dispose of them

08-19-2008, 12:21 PM	#11
jb4short Damn Yankee Join Date: Feb 2007 Location: Lynchburg, VA Posts: 2,261	Re: NOS SWB bedside ???? Rob- if the spot welds holding the inner panel in, just inside the bed in front of the tailights, are on the edge of the metal or about 1/8" in they're probably NOS, ONOS, UNOS or some variant. If those welds are 1/2" to 3/4" of an inch in they're probably repros Should be a vertical line of them top to bottom If they're NOS send them to me and I'll properly dispose of them Last edited by jb4short; 08-19-2008 at 12:23 PM.