The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

scatesracing · 08-31-2008, 06:53 PM

I took the tourch to my stock ones and melted the rubber off of them. and then drilled and tapped some round stock turned a step to fit in the plate for center...... Then welded it all up........ worked slick I tapped it 1/2-13..

08-31-2008, 06:53 PM	#6
scatesracing Machinist Join Date: Sep 2007 Location: Derby Kansas Posts: 296	Re: Solid motor mounts I took the tourch to my stock ones and melted the rubber off of them. and then drilled and tapped some round stock turned a step to fit in the plate for center...... Then welded it all up........ worked slick I tapped it 1/2-13..