[Alan's Classic]

I got my Silverado seats set in temporarily. I have not tried to bolt them in place. The center console is not sitting down on the floor. The front legs will not stradle the hump enough.







I'm in the process of setting the column. I got a tilt column with a key. I don't know what it came out of. Me and Sdailey took the column apart. It had alot of play. I found the pivot plate screws to be backing out. I'm going to see if I can get it adapted to hold the factory ebrake. I also have to work on the neutral safety switch by relocating it further up the column. If so I'll change the bearings since I've got it apart.





I removed the dash today. Here are the spot welds along the top pinch weld.



Something is missing.