The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Project Blaz-Air

Rokcrln · 11-13-2008, 08:31 AM

Looks like a good start. You will also (99%) need the lower A pillar and the inner rockers as most of us have had to do this as well. Just do one side at a time before moving on and their is plenty of reference material here on the site to check with if you need to.

Here are a few to start with~
Rocker replacement 101 http://67-72chevytrucks.com/vboard/s...hlight=rockers

Inner rocker panel replacement http://67-72chevytrucks.com/vboard/s...hlight=rockers

Kevin
LFD Inc.

11-13-2008, 08:31 AM	#29
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: Project Blaz-Air Looks like a good start. You will also (99%) need the lower A pillar and the inner rockers as most of us have had to do this as well. Just do one side at a time before moving on and their is plenty of reference material here on the site to check with if you need to. Here are a few to start with~ Rocker replacement 101 http://67-72chevytrucks.com/vboard/s...hlight=rockers Inner rocker panel replacement http://67-72chevytrucks.com/vboard/s...hlight=rockers Kevin LFD Inc.