|
Re: need aol. answers
Quote:
Originally Posted by blazer2007
I,m trying to do the ntrux setup,I,ve notched the frame and am trying to see where i,m going to sit with removing some leafs and a block if needed,but I see the shocks are staggered and the photo of nutrux frame there is only a pic with only 1 shock installed,not done yet of course,so I,m trying to see where to locate other shock
|
They installed the pass side as a mirror image of the drivers. They cut the lower mount off the front of the axle tube & moved it to the rear. The upper mount is the stud on the frame. IIRC, they 'scalloped' the frame just like the drivers side, but you might be able to space the shock just right to avoid having to do that. N2TRUXs' 77 does have lowering blocks as well.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG
Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....
Cubic inches is like Indiana Jones with a cheap pistol.
|