The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

SCOTI · 12-11-2008, 10:35 PM

I would not consider that a good deal.

The above mentioned SuicideDoors 'limited time' offer of 4-bags w/the necessary front C10 plates/cups will get you on air. Add some relocated shock brackets from ECE w/some KYB's or Monroe Sensatrac (sp?) shocks & you'd have basically the same thing for less than $500.

Spend the left over $500 on a 'basic' air control system (pneumatic paddle control switches, analog gauges, air lines, fittings, small Thomas compressor(s) & 5gal air tank. If you don't play w/the system, you can get by w/just one comp; if you play..... you'll need two.

12-11-2008, 10:35 PM	#4
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,926	Re: "Brothers Air Ride Kit" I would not consider that a good deal. The above mentioned SuicideDoors 'limited time' offer of 4-bags w/the necessary front C10 plates/cups will get you on air. Add some relocated shock brackets from ECE w/some KYB's or Monroe Sensatrac (sp?) shocks & you'd have basically the same thing for less than $500. Spend the left over $500 on a 'basic' air control system (pneumatic paddle control switches, analog gauges, air lines, fittings, small Thomas compressor(s) & 5gal air tank. If you don't play w/the system, you can get by w/just one comp; if you play..... you'll need two. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.* Last edited by SCOTI; 12-11-2008 at 10:37 PM.