The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

skidder111 · 12-12-2008, 02:46 PM

Dirty Larry- Thanks a million! This swap was actually done about 12 years ago. I drove it for a couple years then tore it down for restoration so it has been sitting for a while. The wiring is in nice condition, but if problems ever start, I will look at updating. It is difficult to make the '89 wiring look like it is supposed to be there tho. I am going to check on that p/n wire and try your suggestion. Once again, THANKS!

12-12-2008, 02:46 PM	#63
skidder111 Registered User Join Date: Jan 2008 Location: Pincher Creek, Alberta, Canada Posts: 140	Re: Tbi swap build thread Dirty Larry- Thanks a million! This swap was actually done about 12 years ago. I drove it for a couple years then tore it down for restoration so it has been sitting for a while. The wiring is in nice condition, but if problems ever start, I will look at updating. It is difficult to make the '89 wiring look like it is supposed to be there tho. I am going to check on that p/n wire and try your suggestion. Once again, THANKS! Last edited by skidder111; 12-12-2008 at 02:47 PM.