The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

blue68man · 03-24-2002, 10:25 AM

I had a similar problem with my brake lights. I could get my tail lights to work but no brake or turn signals. I studied the electrical diagram for four days to see where I needed to check. Took out my steering wheel thinking it might be in the signal switch. Then took out the dash cluster and found out one of the light sockets to dash was gone. It just happened to be the one that was in the circuit for the brake and turn signals. Put in new socket and now everything works fine. Hope this might help. I would check to make sure all sockets are tight.

03-24-2002, 10:25 AM	#6
blue68man Registered User Join Date: Feb 2002 Location: camden,ar,usa Posts: 68	I had a similar problem with my brake lights. I could get my tail lights to work but no brake or turn signals. I studied the electrical diagram for four days to see where I needed to check. Took out my steering wheel thinking it might be in the signal switch. Then took out the dash cluster and found out one of the light sockets to dash was gone. It just happened to be the one that was in the circuit for the brake and turn signals. Put in new socket and now everything works fine. Hope this might help. I would check to make sure all sockets are tight. __________________ Mike Cummings proud owner of a blue 68 lwb 250 straight 6, 3 on the floor.