The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Not so budget 3-link build

Twisted Minis · 03-06-2009, 01:24 AM

I'm doing it a bit different on this one, and actually keeping the strut rods. But normally I would push the bushing out as far as possible without interfering with anything. The wider the arm is the more stable it is. I just want to try something different with this one, and make the strut rods work with the Z, since I am doing a tech article for MT on this.

03-06-2009, 01:24 AM	#98
Twisted Minis Registered User Join Date: Nov 2008 Location: Windsor, CA Posts: 500	Re: Not so budget 3-link build I'm doing it a bit different on this one, and actually keeping the strut rods. But normally I would push the bushing out as far as possible without interfering with anything. The wider the arm is the more stable it is. I just want to try something different with this one, and make the strut rods work with the Z, since I am doing a tech article for MT on this. __________________ If you can find it cheaper, I can fix it!