The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

James McClure · 03-09-2009, 10:50 AM

Hoser, thankyou for the compliment. I wish I could say I painted it, but I didn't. A friend did it for me after I primed it up. I used the largest flake I could get. I wanted the stuff they use on boats but I couldn't find it so I went with what I could get. Still need to be wet sanded and buffed out. I'll do the sanding and the guy who painted it will do the buffing. Again, thanks. jim

03-09-2009, 10:50 AM	#123
James McClure One shot, one kill. Join Date: Dec 2007 Location: Saratoga Springs NY Posts: 859	Re: Square Body Club. Hoser, thankyou for the compliment. I wish I could say I painted it, but I didn't. A friend did it for me after I primed it up. I used the largest flake I could get. I wanted the stuff they use on boats but I couldn't find it so I went with what I could get. Still need to be wet sanded and buffed out. I'll do the sanding and the guy who painted it will do the buffing. Again, thanks. jim __________________ 1984 K20 350M engine with 465,000 miles. Well, it's finally done!! Almost 2 years of work, but it was really worth the effort. Little stuff left to do is mount winch, wet sand & buff out and build belly pan\running boards. Body work takes lots and LOTS of beer!!!! God, Guts and Guns made America and God, Guts and Guns will preserve it! The worst thing you could do is get into my sights, but that don't matter, you'll never know it, cause you'll never hear the shotJim or Paladin whichever you choose.