The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - PROJECT "Z069"

**ChiefRocka** · 03-11-2009, 09:28 AM

JUN 24, 08
-
-
I started on the fuel system today. Also received the correct metric-bolts for the flywheel and pressure plate.
-
-
Here's the tank marked for the deep sump:
-

-

-
After marking, I dropped the tank off at the Steam Cleaners for a nice steam-clean and 'de-fume' job.
-
-
Here's some fuel line I picked up from my buddy at GOODIES SPEED SHOP in San Jose....My long-time buddy Rich over their helps me out with all my car builds...
-

-
The plan is to run the new lines in the stock location, here's the OG lines:
-

-

-
-
And away we go:
-

-

-
-

03-11-2009, 09:28 AM	#32
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,147	Re: PROJECT "Z069" - LS7 powered '69 Stingray.... JUN 24, 08 - - I started on the fuel system today. Also received the correct metric-bolts for the flywheel and pressure plate. - - Here's the tank marked for the deep sump: - - - After marking, I dropped the tank off at the Steam Cleaners for a nice steam-clean and 'de-fume' job. - - Here's some fuel line I picked up from my buddy at GOODIES SPEED SHOP in San Jose....My long-time buddy Rich over their helps me out with all my car builds... - - The plan is to run the new lines in the stock location, here's the OG lines: - - - - - And away we go: - - - - - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!" Last edited by ChiefRocka; 03-11-2009 at 09:37 AM.