The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Old School Kid · 03-21-2009, 10:19 PM

Thanks for all the good info guys...

Started tearing apart the front end and am having trouble getting the lower ball joint out... I'm going to stay with the 65 a arm and use the 84 spindles and new upper and lower control arms.... got everything apart and ready just having trouble getting the 65 lower ball joint out... Heated, wacked and wacked some more, no luck..

Any suggestions would be great. I'm going to be back at it in the morning...Help! Got a long list to do and not enough time.....

03-21-2009, 10:19 PM	#104
Old School Kid Rottenwood Garage Member..Yes! Join Date: Oct 2008 Location: Marietta, Georgia Posts: 174	Re: 65 Old School Build on a Budget Thanks for all the good info guys... Started tearing apart the front end and am having trouble getting the lower ball joint out... I'm going to stay with the 65 a arm and use the 84 spindles and new upper and lower control arms.... got everything apart and ready just having trouble getting the 65 lower ball joint out... Heated, wacked and wacked some more, no luck.. Any suggestions would be great. I'm going to be back at it in the morning...Help! Got a long list to do and not enough time..... __________________ When interests become diversified, not all can be Barrett Jackson. Budgets and Accountants get in the way. My 65 (SOLD) http://67-72chevytrucks.com/vboard/s...d.php?t=317013 My 51 (SOLD) http://67-72chevytrucks.com/vboard/s...80#post3551880 Racetruck III (SOLD) http://67-72chevytrucks.com/vboard/s...72#post4254972 Rottenwood Garage and Speed Shop.....where everything must be racy! Gone to dark side for a while...1966 F100 in the stable Last edited by Old School Kid; 03-21-2009 at 10:19 PM.