Ok guys sorry for the delay its been really hectic around here. Got a lil update, and some bad news, ill try and get some photos soon.
UPDATE: I went back and pulled the axle out from under the chassis and it did have a very slight twist to it but it wasn’t as bad as near as bad as the pic showed it to be, so I guess you could say Check and I both had a valid argument on the subject, as it untwisted a lot when I pulled the axle, but still was slightly off. After taking care of that I went ahead and got the frame where the notch meets it reinforced and braced up with a partial box.
THE BAD NEWS
: It will probably be a while before I make anymore major progress on the truck as I have taken about a 50% pay cut here at work and cannot at all afford to be doing any work on it right now
. I’m sorry guys, I’m really bummed about this, but I have to make sure things are inline to save my house and my bike, and I fear that I wont have the time while working the second job to do much. Luckily for me the second job is a parts house so that will help out some when it comes time to get parts again
. The truck is not going anywhere as it’s paid off. But I can assure you all that you will be FIRST to know when the project is back online.