The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - How hard is it to swap front end from 65 to 73-87?

Mongo · 02-20-2001, 08:15 AM

the only thing you need is the uper and lower A-arms with the spindles attached from 72-up. they bolt right in I used the A-arms and spindles off of a 88 chevy 3/4 ton van on my 66 c10. also get the proportioning vlave if you can along with the brake booster.

------------------
Mongo - 30 miles west Of Protland OR.
66 chevy fleet side
1/2 converted to 3/4 ton
ZZ4 crate motor w/700R-4
http://66chevy.homestead.com/66ClassicChevy.html
Remember PEOPLE MAY NOT REMEMBER EXACTLY WHAT YOU DID, OR WHAT YOU SAID, BUT THEY WILL ALWAYS REMEMBER HOW YOU MADE THEM FEEL.

02-20-2001, 08:15 AM	#2
Mongo YES_____NO Join Date: Jul 1999 Location: Somewhere in the vicinity of betelgeuse Posts: 7,351	the only thing you need is the uper and lower A-arms with the spindles attached from 72-up. they bolt right in I used the A-arms and spindles off of a 88 chevy 3/4 ton van on my 66 c10. also get the proportioning vlave if you can along with the brake booster. ------------------ Mongo - 30 miles west Of Protland OR. 66 chevy fleet side 1/2 converted to 3/4 ton ZZ4 crate motor w/700R-4 http://66chevy.homestead.com/66ClassicChevy.html Remember PEOPLE MAY NOT REMEMBER EXACTLY WHAT YOU DID, OR WHAT YOU SAID, BUT THEY WILL ALWAYS REMEMBER HOW YOU MADE THEM FEEL. __________________ People many not remember what you said or what you did, but they will remember the way you made them feel. - unknown Cause, remember: no matter where you go... there you are. - Buckaroo Banzai 1984 Help support the board