The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Project: NO-LIFE,...

**lolife99** · 04-19-2009, 01:33 AM

Here's a shot of the low point of the truck. The a-arms.
I have cheap Summit Racing brand 3" drop springs (actually made by Ground Force) and McGaughy 71-72 drop spindles. The tie rod sleeve is a conversion sleeve made by POL (Performance OnLine). It's required to connect the inners to 71-72 outers. Actually the inners are 67-70 "outers" used as inners for the correct thread. (long story,... but neccessary)

I also went with manual disc brakes due to the position of the 6-cylinder stock air cleaner.
Also,... I stole this idea from member tcb-1. (for a cleaner look).

04-19-2009, 01:33 AM	#31
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,686	Re: Project: NO-LIFE,... Here's a shot of the low point of the truck. The a-arms. I have cheap Summit Racing brand 3" drop springs (actually made by Ground Force) and McGaughy 71-72 drop spindles. The tie rod sleeve is a conversion sleeve made by POL (Performance OnLine). It's required to connect the inners to 71-72 outers. Actually the inners are 67-70 "outers" used as inners for the correct thread. (long story,... but neccessary) I also went with manual disc brakes due to the position of the 6-cylinder stock air cleaner. Also,... I stole this idea from member tcb-1. (for a cleaner look). Attached Images __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823 Last edited by lolife99; 04-19-2009 at 01:36 AM.