I put the seat back in and closed the cab door for the last time! Only part left of the DM install is the PS lines, my guy came bu tonight and did a few mock ups but I was not happy with what he had so we will try again tomorrow night. I am wanting a clean simple look without a bunch of adapters if at all possible. That tunned is about 1/4" clear of the seat and looks really good.
I started on the bed tonight with panels I had my sheet metal shop brake up for me to Kens specs. He wants the top rails of all 4 sides the same and now they are! I will finish weld them up in the next day or so then spray on a coat of epoxy. First thing I did was trim the panels since I had them made 1/4" long so I could trim to fit. Then I cut two flat pieces to weld in the floor to seal off the chamber once the panels go in.
Kevin
LFD Inc.
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]
[IMG]
[/IMG]