The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

dennis57 · 05-12-2009, 05:58 PM

Progress. I finished filling the holes, cut out a section on the driver's side and removed the nuts welded to the outside of the firewall on the driver's side. I have a done some hammer work, grinding, bondo and primed. It's roughed in and not looking too bad. Time to work on the bottom side.

05-12-2009, 05:58 PM	#18
dennis57 Registered User Join Date: May 2009 Location: Rio Rancho New Mexico Posts: 155	Re: My 57 build (lots of pictures) Progress. I finished filling the holes, cut out a section on the driver's side and removed the nuts welded to the outside of the firewall on the driver's side. I have a done some hammer work, grinding, bondo and primed. It's roughed in and not looking too bad. Time to work on the bottom side.