Re: rear suspension help
No problem copying my LCA design, that's what it's there for.
There are guys on this board running jeep springs as lowering springs. They are long and soft. Make for a non-stiff ride and give you the drag racing performance you will need.
DJ is running a coil over behind the axle with the factory trailing arms as are a couple other guys. Your just going to need to figure out what to do about the panhard bar.
__________________
------Motor---------------Bottle
60'---1.53---------------1.41
1/8---6.58 @ 105.92----5.87 @ 118.41
1/4---10.38 @ 126.97----9.24 @ 142.49
|