I am parting out this 68 short fleet. The bed is really nice and the floor is nice and striaght and 99% rust free, however is does have a hole in it from a fuel fill spot, and the rear brace has been trimmed up for a blazer tank set up. There is some heavy pitting on the front bed panel at the bottom but not thru anywhere.
There is some filler in on the tail end of the bed, and some on the DS.Wheel houses are nice!! NO TAILGATE
I am asking $800 obo for the bed.
I also have a floor shift tilt, it does not have a neutral safety switch and has a different looking shaft that extends to the steering gearbox, not sure if it came in our trucks, but I kno wit fits
. The tilt part is very nice and tight and it has the correct harness plug for our trucks.
$250 OBO
The hood is a 69-72 and is nice...$50 obo
V-8 motor stands $25 obo
driver door, looks nice has some very small bubbles in the outside lower front corner. Galss is good, vent handle is broken, window reg is no good. It will come comeplete as you see it $75 The stuff on the door is glue, someone has fabric glued to them, Same for the passenger door as well
pass door, has a very small amout of rust in lower corners, hinges area is good and the door is complete as well... $50 (two trucks has first shot at this)
Radio delete cowl, I believe it has been shaved off, not sure till I pull. If it is shaved they did a good job.... $50
Used Blazer tank kit, not sure of condition, doesn't look too old at all, I can take off and include the hardware $100
Rust free 69-72 core support(looks like it from the pics, will kno wfor sure tomorrow) $150 obo
Rust free inner fender driver side $50
Pass side isn't terrible and could be patched $25
Brake booster, M/C combo with prop valve, mounting brackets and pedal rod
Unknown condition $50
1968 SWB frame, trailing arms. It has 5 lug suspention on it already, discs brakes in the front. Come with driveshaft.The frame looks to be in great shape, not rusty at all, and the trailing arms are very nice. It has been lowered in the rear, not sure on front. The po cut the front frame horns off for a fantom grill, but I do have a set of horns that I will include, should be an easy fix. The frame has a manual tranny crossmember in it not, but I will throw in a auto crossmember. $350 obo
The cab is garbage and I have a bill of sale and will try to get a title,(not sure if I can yet) if I do get the title the person who get the frame can have the cab and the title for $100, plus my cost to register to get the title.
If you see anything I didn't price just ask and I will.I masy be able to help deliver some of the parts just ask.
All parts prices DO NOT include shipping give me your zip for an accurate quote.
All responses are to be in the thread only as to not start any confusion.
NO pm's until you have posted your intentions in the thread.
Here are the pics