Re: Got some new wheels: Boss 338's in 20x10 and 20x8.5
Jbham88 I simply machined them until they fit taking care to keep as much material as possible around the race ares , This is why I suggest the coning. I can tell you the end of the snout was machined down to the same size as the aftermarket replacement cap and it only has about 1/32 of an inch clearance in the wheel.
__________________
2-20, 2-21 whatever it takes!
Last edited by Hickup pickup; 07-10-2009 at 11:10 AM.
|