The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Let See Some Do-It-Yourself Paint Jobs

cstm68 · 07-11-2009, 01:09 AM

spraying the paint is the easy part, just make shure the paint is mixed good, get the parts right mine was a single stage and i think it was
4 to 1 to 1, get your air psi right and stay steady and consistant. always run past the panel, never let go of the trigger over the panel. and air temp in your booth is important to and have fans blowing away from what your painting, this pulls the drying paint particals in the air away from the wet paint

07-11-2009, 01:09 AM	#23
cstm68 Registered User Join Date: Jan 2007 Location: shoreline, wa Posts: 1,565	Re: Let See Some Do-It-Yourself Paint Jobs spraying the paint is the easy part, just make shure the paint is mixed good, get the parts right mine was a single stage and i think it was 4 to 1 to 1, get your air psi right and stay steady and consistant. always run past the panel, never let go of the trigger over the panel. and air temp in your booth is important to and have fans blowing away from what your painting, this pulls the drying paint particals in the air away from the wet paint __________________ 68 swb fleet bagged on 20's 327 with 4 speed http://67-72chevytrucks.com/vboard/s...d.php?t=223308 2014 Chevy 2500hd duramax CCLB Last edited by cstm68; 07-11-2009 at 01:11 AM.