Quote:
Originally Posted by hotrodrookie
Nice and tight with those headers! Im getting ready to sit my 5.3 in my 59 that has also been camaro clipped. I dont know if you mentioned it but what vehicle were those headers made for? How close was the truck pan to the ground?
|
I'm using Eldelbrock 65762
http://www.summitracing.com/parts/ED...5&autoview=sku
Like i said earlier drv side fit great, pass side need modification. The truck oil pan was below the crossmember about 3in with only about 4in clearance to the ground. So i when with a Camaro 1998 - 2002 oil pan now the oil pan is about 1/2in above the bottom of the crossmember and it about 7 - 8 in off the ground.