The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**l79m20** · 08-07-2009, 03:29 PM

Some time ago I removed the water pump from my 66 250/6 and while pulling the fan out carefully I dropped all the parts onto the ground below me. Now is the time to replace pump ,pulley, extension, and fan. My problem is that with all those parts there is a round plate that is cupped on the oter edge with 4 hole to match up with the fan. My question is where does this disc belong? under the pulley? Can any one help me out?................Kirby

08-07-2009, 03:29 PM	#1
l79m20 Registered User Join Date: May 2005 Location: Reading, Kansas Posts: 628	Assembly Help Some time ago I removed the water pump from my 66 250/6 and while pulling the fan out carefully I dropped all the parts onto the ground below me. Now is the time to replace pump ,pulley, extension, and fan. My problem is that with all those parts there is a round plate that is cupped on the oter edge with 4 hole to match up with the fan. My question is where does this disc belong? under the pulley? Can any one help me out?................Kirby Last edited by l79m20; 08-07-2009 at 06:31 PM.