The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Locknkey · 08-09-2009, 10:26 AM

Look for a 89 chevrolet silverado, take a drill with a 3/8 in bit, and remove the motors form both doors, after pulling the door panels. Take everything out including the window brackets, replace with a pop rivet gun and the correct size pop rivets and you'll be good to go. The motor an everything is simple to pull as its on a plate that comes out as a unit. A simple pull an replace procedure.

08-09-2009, 10:26 AM	#4
Locknkey Registered User Join Date: Jan 2007 Location: Arkansas Posts: 76	Re: Full manual conversion to power Look for a 89 chevrolet silverado, take a drill with a 3/8 in bit, and remove the motors form both doors, after pulling the door panels. Take everything out including the window brackets, replace with a pop rivet gun and the correct size pop rivets and you'll be good to go. The motor an everything is simple to pull as its on a plate that comes out as a unit. A simple pull an replace procedure.