View Single Post
Old 09-14-2009, 10:13 PM   #56
rfmaster
Registered User
 
rfmaster's Avatar
 
Join Date: Oct 2003
Location: OC CA
Posts: 1,374
Re: 5.7 TBI in an 86????? Anyone done this swap??

Mike

Good progress despite rainy weather - I spent better part of weekend and today battling a flu.

Photo #1 - I am not sure what that vacuum module is. I am guessing on this one, but it was used to monitor vacuum levels for cruise control system.

Photo #2 - looks like a cruse control module. It is a guess on my part.

Photo #3 - CS series Delco-Remy alternator. You have couple of options here. Since you have two wires going into the plug you have a self excited unit and only 'L" and 'I' terminal are connected to wire harness. You can get a replacement pig tail from most auto parts stores or cut the one that you have and wire it into existing harness. Only 'L' light circuit is required:




For more information regarding CS alternators look here:
http://www.alternatorparts.com/cs130_sbpage1.htm

It is a commercial site, but they provide good information. Or you can simply purchase an adapter harness for about $18 D1-W1201


//RF
__________________
"The Beast"

1975 Chevrolet C20 longbed
350/700R4! with 3inch body lift
Dual Flowmasters Super 40's!
TBI retrofit completed (2007-07-29)
New 383CID (+030) 08-304-8 9.5:1CR x36,005 (2012-12-17)
rfmaster is offline   Reply With Quote