[dznucks]

upper bag spacers, basically. i didnt feel like drilling all the holes through the notch, frame, and spring pad.

i cant find the thread where i found this picture. mine are very similar to this.
i bought the lower plate from air lift. it already had the bolt holes and fitting hole as well as the nut welded on. $15/each.
then i had the ring made out of schedule 40 pipe with the opening cut out at a local fab shop. $25.
and i welded them myself.

i made them 1 1/2" becasue the fittings were 1 3/8" tall when tightened down.

i am resizing all my pics from last weekends install and plan on posting the install soon.

I am going to add 1 1/2 in spacers to the rear to compensate when i remove the trailings arms to install new poly bushings.