The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

VA72C10 · 09-27-2009, 06:40 PM

Looks good. Nice job on the glass. With the cowl, I am not running the sprayers. So those holes went away. THe mounting holes also are shaved. The biggest thing is to be sure to weld SLOWLY with lots of time in between for the metal to cool and switch back and forth from one side to the other. IF not, it WILL warp on you. And without the mounting holes, you won't be able to screw it down if it warps.

09-27-2009, 06:40 PM	#66
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: My 69 lonbed Looks good. Nice job on the glass. With the cowl, I am not running the sprayers. So those holes went away. THe mounting holes also are shaved. The biggest thing is to be sure to weld SLOWLY with lots of time in between for the metal to cool and switch back and forth from one side to the other. IF not, it WILL warp on you. And without the mounting holes, you won't be able to screw it down if it warps. __________________ Looking for a 67-72 swb or blazer project in or around VA.