A friend had some Bilsteins laying around from an old 77 4x4 that he no longer owns so I grabbed them from him. The fronts fit fine but the rears won't as the mounts are different. (I suppose many of you knew this already)
Anyways... up front the Billys replaced some very old coil-overs and the change in ride quality and control is HUGE. Even with the old shocks in the back there is a major improvement in handling and bumps are much less harsh and minus all the po-going afterwards.
Part number for the front is F4-B46-0923-HO - This is one of their "heavy duty" shocks, yellow with a smooth blue boot and with slightly more aggressive compression valving than some of their other models.
I won't know for sure exactly how I like these front shocks until I get the new springs but if I keep them then for the rears it looks like I will be going with either Bilstein 4600s or 5100s as not much else fits.
Best regards,
Matt Crawley