Quote:
Originally Posted by Metal
Ok here we go...
Maybe some one can make a diagram out of this for you ????
I used 3/4 MDF with Formica on both sides.. It was what was laying around at work back when I still had a job. In fact we used the CNC router and the program is saved. If I had access I could have whipped you up one in about 5 minutes....
Measurements in inches.. All out side dimensions.....
Length 29 wide
High 15, This is up the back as the slant on the front will be longer..
Depth at top 3
Depth at bottom is 7 ..
Now as for the size of the hole I have no idea as of now and really don't want to pull the sub..
Note that the sub is mounted from the outside, also that it is a sealed box packed with poly fill....
Hope this helps....
|
good info if my calculations are correct that right at about 0.75 Cubic Feet. Would one double the length fit behind the seat?