Re: Tommys66 Build
Had to take a break from working on the cab, so I put my rearend together. I chose to go with a 9" ford with 3:50 posi. The housing I used did not have a drain plug or a fill plug, neither did the 3rd member. I drilled and tapped the third member with 1/2" pipe tap for the fill. I added a magnetic tip drain plug to the bottom of the housing at about 5 O'clock. I have not welded the axle seats on yet, waiting to set the pinion angle, then I will pull it back out for paint.
__________________
I love the smell of lead paint!
|