Quote:
Originally Posted by lownslw64
my motor is out of a 02 camaro ss 35th anniv with 38,000 miles and i am running sanderson headers(part#cs-ls1). i pulled the front of the motor off because the stock alt and a/c comp. hit my rack and both side frame rails. I didn't want to notch the rails so i am saving up to buy the billet specialties top mount tru trac system. The motor isn't in the truck yet, hoping to install it in the next week or so. As soon it is installed i wil post some pics. I will have to notch the firewall for clearance of the back of the heads and i will probably have to modify the trans tunnel for clearance also.
|
lownslw64,
Is there a kit for the crossmember needed to install the LS1? Or did you use the front end pieces from the camero to install in your truck? Thanks for the info, I am about to start My 1956 Bigwindow Short Step and I am thinking about putting a 6.0 Liter with a Kenny Bell Super Charger in that. I have been starting to gather info and this is really helpful.
Thanks,
JRBECK64