|
Full Length Hedman Headers
I am selling used Hedman Headers. I used them for just over a year and a half. I cut off the cheaper Hedman ball flanges and welded on a set of Flowmaster Ball Flanges. There are three O2 sensor ports. One port has a plug and easy access for dyno sessions. These are the larger 1-3/4" primary diameter pipes for larger displacement SBC. You may need to ccut the inner edge of the frame a bit (1/4") for clearance down by the flanges. Let me know if there are any questions.
Please post in this thread first if you are interested.
Hedmen P/N: 69080
Link
Please check your application first (wont work with manual column shifter according to Hedman)
$200 shipped
__________________
83 C10 Stepside (SOLD, it was a blast!)
383 MASS-FLO EFI/TKO II 600/3.90 Posi 10 bolt
S475 and C4 DM running, fine tuning
turbo= 
Douchebag Racing: Runs Fine all the Time
Last edited by Wild83C10; 11-24-2009 at 10:19 PM.
Reason: added pictures
|