Re: Chevy cheyenne 93 five speed manual transmision
Since you're swapping the tranny into an older truck you'll need to take the shifter and I'd grab the driveshaft too. You might have to splice them together or find a conversion u-joint so you can use the yoke for the '93 tranny. You'll need to mod the clutch setup though. The '93 will have a hydraulic clutch setup. I don't have the details for that though. There may be a faq on here about it. You'll also need to work out something on the crossmember. I'm not sure if you can just use the crossmember out of the '93 and cut it to fit or what.
Last edited by highperf4x4; 12-05-2009 at 01:55 AM.
|