Okay, back on track. I got a little time to work on the cab this evening. I was able to finish up the hacked areas on the lower front left and right thanks PO! Then moved on to the passenger rocker panel. It looks like the the PO replaced it but left some rust on the lower door pillar. It looks like the driver side is still ver solid and even the rocker looks solid with the exception of the huge dent probably from moving the cab around by the various owners so much. I don't know if the dent can be pulled or if I should just change it? Here are the pics:
Driver side before the patch
![](http://i14.photobucket.com/albums/a305/mcbassin/Landen%20Truck/69-41.jpg)
Fitting the patch
![](http://i14.photobucket.com/albums/a305/mcbassin/Landen%20Truck/69-42.jpg)
Pass. side
![](http://i14.photobucket.com/albums/a305/mcbassin/Landen%20Truck/69-43.jpg)
Pass side Welded
![](http://i14.photobucket.com/albums/a305/mcbassin/Landen%20Truck/69-44.jpg)
Driver Side
![](http://i14.photobucket.com/albums/a305/mcbassin/Landen%20Truck/69-45.jpg)
Front view
![](http://i14.photobucket.com/albums/a305/mcbassin/Landen%20Truck/69-46.jpg)
Pass. Rocker Panel cut out
![](http://i14.photobucket.com/albums/a305/mcbassin/Landen%20Truck/69-39.jpg)
Pillar
![](http://i14.photobucket.com/albums/a305/mcbassin/Landen%20Truck/69-40.jpg)
Driver side pillar
![](http://i14.photobucket.com/albums/a305/mcbassin/Landen%20Truck/69-47.jpg)
Driver rocker