The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

cdowns · 12-07-2009, 03:13 PM

to run grounds there is no cutting of wire harness//you get a wire or strap ,drill a hole in crosssill of bed and attach one end then you drill or use existing hole in frame to mount the other end of ground cable// all mount holes should b bright shiny metal to metal contact for good grounding

12-07-2009, 03:13 PM	#4
cdowns Senior Member Join Date: Jan 2003 Location: daytonabeach Posts: 22,956	Re: No tail lights!!! to run grounds there is no cutting of wire harness//you get a wire or strap ,drill a hole in crosssill of bed and attach one end then you drill or use existing hole in frame to mount the other end of ground cable// all mount holes should b bright shiny metal to metal contact for good grounding __________________ 71c-10 350/2004r/4:11 lowered3/4 longbed/dead by hurricane MEANING OF DEATH::::: SOMEBODY ELSE GETS YOUR STUFF DONT BELIEVE EVERYTHING YOU THINK TAKE MY ADVISE;I DON'T USE IT ANYWAY