The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Over 25 Years Later, Finally My 71 C-10 Truck Build

hgs_notes · 01-26-2010, 11:03 PM

Thanks for the input guys. After all the sanding yesterday, then digging out from our blizzard today, my back, shoulders and legs are shot. I'll get the finer grit sanding done this weekend. So once that is done, I should be ready to spray the epoxy primer right? I started scuffing the inside of the cab using a red scuff pad and planned on spraying the inside of the cab and the back at the same time.

01-26-2010, 11:03 PM	#163
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,118	Re: Over 25 Years Later, Finally My 71 C-10 Truck Build Thanks for the input guys. After all the sanding yesterday, then digging out from our blizzard today, my back, shoulders and legs are shot. I'll get the finer grit sanding done this weekend. So once that is done, I should be ready to spray the epoxy primer right? I started scuffing the inside of the cab using a red scuff pad and planned on spraying the inside of the cab and the back at the same time. __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff