Quote:
Originally Posted by Dinos63
sh-t to late to wave..... will looking good ,that sub is going to fun with that motor
|
.....damn straight
..................
A mid-day update as I know many are on the edge of their seat!!
Here are the mounts and some more measuring. Off the core support, directly in line with the frame, my mounts are going 18.5'' back to the front edge. I have also surmised that I have a newer X-member that I was not aware of. I think that is why the mounts fit so nicely.
I notched the frame back roughly .5'' to fit the mount in place. I also redrilled the 2 lower holes which are directly below the factory holes. This puts my mount holes at exactly 16.75 inches to center. I will put a thick washer(1/16th) under the front lower hole to act as a spacer as there is a little rocking of the mount.
Now I just need to blast 40+ years of grease and dirt and move a brake line and my trans lines. Also getting a coat of black rattle to pretty things up.