Re: Project: Recycle
Quote:
Originally Posted by aggie91
Scoti - I thought that the Porterbuilt TA's moved the center line of the rear axle back that 1.5"? or am I missing something?? What about just moving the cross member back the required 1.5"?
On another note, can you get a measurement for me? I no longer have a stock rear end houseing. I need to know how far part the mounting pads on the axle are? A measurement from the center of the rear hole (for the u-bolt) to the center of the other rear hole and the same for the front holes would be helpful. Thanks in advance.
|
The PB arms are the same length (and adjustable). The PB TA c.member has the option to shift the rear axle back (different set of holes from what I remember). I'm using an ECE c.member that I already had so I didn't get the PB unit.
As for moving the c.member back, that's one method among several options. I figured by using the alum spacers, I can fine tune the exact dimension I want vs. drilling more holes & limiting the placement options (what if I need more/less that I thought??).
I'll try & get you those housing pad dimensions tonight.
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG
Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....
Cubic inches is like Indiana Jones with a cheap pistol.
Last edited by SCOTI; 02-09-2010 at 11:41 AM.
|