The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

JW76 · 02-22-2010, 06:28 PM

I pulled the front clip and blasted the frame to coat with Por 15. The engine I built was a 4 bolt block with a 4140 forged crank, forged rods and flat top SpeedPro hypereutectic pistons. The heads were off a camaro. I got them for free from a friend along with an old Edelbrock intake. The cam was a pretty radical Powermax grind with 500+ lift and 300 degrees of duration. The carb was a holley 650 double pumper.

02-22-2010, 06:28 PM	#14
JW76 Registered User Join Date: Dec 2008 Location: Providence Rhode Island Posts: 404	Re: My 86 C10 Project I pulled the front clip and blasted the frame to coat with Por 15. The engine I built was a 4 bolt block with a 4140 forged crank, forged rods and flat top SpeedPro hypereutectic pistons. The heads were off a camaro. I got them for free from a friend along with an old Edelbrock intake. The cam was a pretty radical Powermax grind with 500+ lift and 300 degrees of duration. The carb was a holley 650 double pumper.