I am gathering the parts and supplies needed to do this engine right.
Here is my list of what I have:
Hyper Lube assy oil
Moly assy grease
New oil filter
New lifters
New push rods
New timing set
New cam
Rebuilt 350 heads- Thanks to everyone's advice...
even Ticker's
Block is honed and cleaned and painted with high temp engine paint.
What I need to get:
Re-ring kit that includes gaskets and bearings...etc...
Piston ring compressor tool for putting in the new rings.
Plastic gauge- and patience with learning how to use it.
I will document the whole process as I assemble the new block and post another video.
I still have to pull a couple of parts from my old block, such as the new water pump I just installed, the fuel pump, and the accessories. I will be upgrading my distributor to the HEI at that time so I will be re-wiring a 12 volt supply from the fuse block. I will ground it to the block.
__________________
Thanks, Aaron
Life is about making dreams come true, stop dreaming and make life happen.
64 GMC Project MY_YOUTUBE_VIDEOS To keep an opened mind- speculation is devine.
Assumptions always lead to a dead end!