The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

OhOneWS6 · 03-06-2010, 03:05 PM

Same wheel and tire combo before and after the drop on mine.

Hey Trip, Are your springs from ECE? What motor does your truck have? Would you mind measuring from the center of the hub to the wheel opening? I have about 16 3/8 inches. I used a framing square to make sure I was square with the ground and then put my tape measure parallel to the square and measured down. You don't have to be as exact I just want to know if it is even in the ball park.

TIA,
Matt

03-06-2010, 03:05 PM	#10
OhOneWS6 Registered User Join Date: Dec 2009 Location: DFW, TX Posts: 764	Re: Those with ECE 2" drop in front Same wheel and tire combo before and after the drop on mine. Hey Trip, Are your springs from ECE? What motor does your truck have? Would you mind measuring from the center of the hub to the wheel opening? I have about 16 3/8 inches. I used a framing square to make sure I was square with the ground and then put my tape measure parallel to the square and measured down. You don't have to be as exact I just want to know if it is even in the ball park. TIA, Matt __________________ 72 Cheyenne Super 1/2 LWB White/Dark Yellow 07 Avalanche 2LT 74 Sleek Craft Rebel Jet Boat W/Pontiac 400 Last edited by OhOneWS6; 03-06-2010 at 03:10 PM.