The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**aerotruk63** · 03-20-2010, 09:01 PM

If you make a paper template from the exposed drivers side tapped openings, then reversed the template to the passenger side it should be close. I don't have access to my truck to measure my theory! Alot of templates for Chevrolet Custom Accessories simply state to reverse the template to the passenger side. Can anyone run out and measure?

You could use Riv-nuts if you don't want to take the door apart.

03-20-2010, 09:01 PM	#4
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,625	Re: adding passenger side door mirror ? If you make a paper template from the exposed drivers side tapped openings, then reversed the template to the passenger side it should be close. I don't have access to my truck to measure my theory! Alot of templates for Chevrolet Custom Accessories simply state to reverse the template to the passenger side. Can anyone run out and measure? You could use Riv-nuts if you don't want to take the door apart. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1 Last edited by aerotruk63; 03-20-2010 at 09:08 PM.