Going to be putting cylinder heads on today, I will take my camera with me this time.
Found a great resource for information, thanks to ebay. I found a 6.0 LQ4/LQ9 specific engine manual for around 30 dollars shipped. It just so happened that there was a part number from this manual, so I google'd it and found that the company had the pdf linked directly off of their site.
www.pleasurecraft.com/manuals/L510016.pdf
It is somewhere around 300 pages printed, but it makes for a great read on the proper torque rating and squence for everything to be clamped down. It has by far been the best resource I have used so far for research. It even shows appropriate metric thread size for the bolt holes etc..
I am still short an oil pan, pickup tube, starter, front drive accessories, coil packs and smaller things..
I did find a seller on
ebay that had what I needed to do my a/c compressor relocation due to the Trans-dapt motor mount plates blocking the factory compressor mounting bolts. I will get a picture of that too..
Otherwise, no other updates until pictures hopefully later tonight.